7/10/2023 0 Comments The rewinder switchTest to ensure that it’s tight enough by running your fingers over the bobbin area. You can do this by following these instructions for your Janome machine: Locate the screw on either side of the bobbin case (it should be accessible without opening the machine). First, you’ll need to take the bobbins out and then tighten them to ensure they’re in place. Janome’s sewing machine bobbin problems could arise when the bobbin case becomes loose after being threaded. This will also help keep your line from getting caught between your bobbins. Try winding the thread under tension when putting it in the bobbin case. Your needle could be too long, so you need to replace it with a shorter one. You can fix this by adjusting the bobbin case or moving the bobbins apart. ![]() The bobbin may be too close together, so the thread is caught up between them. If it still doesn’t work, you should try replacing your needle with one new or sharpened one. The first thing that you should try is moving your bobbin to a different position on your machine. One of the most common bobbin problems is that the thread doesn’t seem to catch even if you are following the proper technique. So, without further ado, let’s start reading! This sewing machine may have different problems, and you need to learn them carefully and understand Janome sewing machine bobbin problems.
0 Comments
Leave a Reply. |